Artdio IPE 1000 User Manual download pdf (Page 60)

4.3 TCP/IP Configuration

The TCP/IP can be configured through the system console and the Web management interface. There are

two ways to obtain the IP address:

1. Manually assigned.

2. DHCP server assigned.

You can select which way you prefer to obtain the IP by setting the IP State mode. If Manual is selected, the

administrator must assign it manually. If DHCP is selected, it will obtain the IP from the DHCP server. You

need to set up a DHCP server and configure its IP address so that the gateway is able to locate it. If the

gateway is configured using the DHCP mode but cannot find the DHCP server, it will use the IP that was

previously configured. After the gateway has successfully acquired the IP address, it will update the newly

acquired (manually configured) IP.

Web Management

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 90 91

No comments

Artdio IPE 1000 User Manual Page 60