ArtDio IPS-1000 User Manual download pdf (Page 42)

1000 Series VoIP Gateway

9. Appendix

9.1. Appendix A: Manual IP Searching Procedure

Perform the following steps to do the IP Searching:

1. Use the phone connected to

ARTDIO IPH to dial to ARTDIO IPH’s number that you attempt to search (without the “#” key).

For example: 00216264451245

2. When the recipient answers the phone, ask him/her to press the “#” key twice. The searching process will then begin and

both sides should hear the searching tone (a short beep every two seconds).

3. About 15 seconds later, you should hear three consecutive beeps indicating a successful searching. Otherwise you will

hear one long beep indicating that searching has failed.

4. Hang up the handset.

The manual IP Searching function can be used when

ARTDIO IPH is connected to a PBX extension line. You must dial the PBX

first then transfer to the extension number that

ARTDIO IPH is connected to. Assuming you are dialing from Taipei to U.S.A.

and the number you are dialing is 1-626-3532158 with extension 540, follow the steps below:

1. Dial “00216263532158” which connects to the recipient’s PBX.

2. Dial the extension number “540” after the greeting.

3. When the recipient at extension number “540” answers the call, ask him/her to press the “#” key twice.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 53 54

No comments

ArtDio IPS-1000 User Manual Page 42